"Without a commitment to withdraw partisan and sectarian politics from the selection of senior inspectors general leadership, there is the likelihood that investigations will not have credibility."
So sayeth the sages who are reporting from Iraq on the state of the "government" there and their courts system.
Ironic, huh?
In other news:
I am so "L33+". Last nite on the way home from work I realized my left turn-signal had a lamp out. By process of elimination (checking for reflections in other people's bumpers), I realized I was also missing a brake-lamp, as both the turnsignal and brake use the same lamp. Joy. *sigh*
I also had a trunk full of boxes, which I had to unload first, so I went home and unloaded - then realized that since I had the car going anyhow, it wouldn't be all that hard to drive to a "service station" - which isn't that easy to find anymore! - and get it fixed.
On my way to finding the Marathon station that still has a mechanic on staff, I noticed a "Car Quest Auto Parts" store - so I drove in. I went in my trunk and pulled out the carpeting away from the back of the taillight, and voila - within seconds I had a burned out light-bulb in my hand. Went in, showed it to the guy, and got a new one for $1.38. Went back out to the trunk, plugged in the new one, started the car, checked to make sure I had turnsignalage - and SUCCESS!! Drove off with working lamps. WOOT!!
Would have cost me over $10 at the service station, no doubt. I am feeling very sassy and superior for this - which is silly because it's only a freaking taillight bulb - but hey, ya takes yer "attagirls" where you can gets 'em, eh?
486 days
Here's a big ATTAGIRL for you. There's no better feeling than taking care of business all by yourself.
ReplyDelete"I realized I was also missing a brake-lamp"
ReplyDeleteThat is correct, they use the same filament, the other filament in the bulb is for the tail lights. If the problem isn't in the bulb you can almost always bet that it is in the turn signal switch.
But that is only on cars designed and made in America. Cars made in other places, or foreign cars made in America often have another bulb for the turn signal that has nothing to to with the brake light.
But you did good in figuring that out. Really. And your library has a lot of books on auto repairs and you can learn how to do many of your own repairs.
I learned how to rebuild automatic transmissions on my own, anyone should be able to learn how to do a lot of repairs on their cars.
But if the electronics are fucking up you do need help. Thankfully I have friends in that business that will help me.
In 64 years I suppose that I've spent less than two hundred bucks to have others fix my rigs for me.
I don't even like others working on my rigs. It's a result of working with mechanic's for years I suppose, because many of them are idiots and I've had to fire a lot of them.
A good work bench, the proper tools, a decent manual, and my mother could rebuild an automatic transmission.
ReplyDelete"Without a commitment to withdraw partisan and sectarian politics from the selection of senior inspectors general leadership, there is the likelihood that investigations will not have credibility."
ReplyDeleteBe much easier if they just said "It's FUBAR"
Then we'd all understand.
You know what cat litter manufacturers say....
ReplyDeleteRave On, Cat shit!:)
Visionary?
ReplyDeleteNo matter how many books on it I read, knowing how to rebuild an auto tranny isn't going to help me any, since I drive a stick-shift.
*grin*
Even better, Sew, since a stick rarely has the same problems or breakdown rate as an automatic has. Just don't mess your clutch pack or flywheel up.
ReplyDeleteAs for BBC.. That would be a 1989 Model AOD 4-speed automatic transmission mated to a 302 cu EFI gas powered ford motor of the same year. Now, that particular tranny has never been rebuilt as she's only got 85k original miles on her, but its been through the usual service when i got my hands on it.
I am atm rebuilding an '89 AOD /4wd also mated to a 302 EFI that fits in a Bronco. I sorta fried the O-drive band on it while while driving it from my old house to my new one. It's not an uncommon issue as the stock band is too damned small for the size of the vehicle it moves. That will be remedied with the installation of a kevlar band. I've done both gm and mopar (the above is my 1st Ford) as well over the years, mostly when I was an active build/driver in the wrecking circuit. A little know how is nice to have and helps tons, but the majority of it is organization and bolt-turning.
I wouldn't know what exact bulb Sew bought as I wasn't there, nor do I care really. She did it. It worked. Yay for all.